Click image to view full size image
Ultrasonic biodiesel dispersion can also called ultrasonic biodiesel emulsification, the mixture of two (or more than two) insoluble liquids is uniformly distributed to form a dispersion system, where a liquid is evenly distributed in another liquid to form emulsion process.
Description:
Type |
YPS55B-HB |
YPS57B-HB |
YPS59B-MB |
YPS61B-MB |
Power |
1000W |
1500W |
2000W |
3000W |
Frequency |
20Khz |
|||
Amplitude/power adjustment range |
50-100% |
20-100% |
||
Temperature |
＜100℃ |
|||
Volume of reactor |
5-10L |
|||
Standard Spec |
Ultrasonic device + Digital Generator |
|||
Optional configuration |
Stainless steel reactor, Remote communication interface, flow meter |
|||
1. High emulsifying quality
The average droplet size of the emulsion formed is small, and it can be 0.2 ~ 2 μm, and the size distribution range of droplet is narrow. It can be 0.1 ~ 10μm or more narrow, high concentration, pure emulsion concentration can reach 30%, and the emulsifier can reach 70%.
2. The type of emulsion can be controlled
Under certain conditions of sound field, o/w (oil in water) and w/o (oil in water) emulsion can be prepared. However, mechanical emulsification is not possible. Only the nature of emulsifier can control the type of lactic acid.
3. Emulsification stability
A stable emulsion can be produced without or less use of emulsifier. Some can be stabilized for a few months to more than half a year, energy consumption is small, production efficiency is high, and the cost is low.
http://www.fycgsonic.com/